Typ VA Series 42 4290NX
Machine taps typ VA for steel up to 1000N/mm2 [For blind holes]
High precision machine tap with 40° spiral, metric, DIN 376, vapourised, suitable for structural steels, cast steels, free cutting steels, spheroidal and malleable cast iron, aluminium alloys Si<10 %, long chipping copper alloys.
Product variants
| ID | D1 | P | Tolerance | L1 | L2 | D2 | a |
|---|---|---|---|---|---|---|---|
| 042037332030000 | M3 | 0,5 | 6H | 56 | 5 | 2.2 | 0 |
| 042037332040000 | M4 | 0,7 | 6H | 63 | 7 | 2.8 | 2.1 |
| 042037332050000 | M5 | 0,8 | 6H | 70 | 8 | 3.5 | 2.7 |
| 042037332060000 | M6 | 1 | 6H | 80 | 10 | 4.5 | 3.4 |
| 042037332080000 | M8 | 1,25 | 6H | 90 | 13 | 6 | 4.9 |
| 042037332100000 | M10 | 1,5 | 6H | 100 | 15 | 7 | 5.5 |
| 042037332120000 | M12 | 1,75 | 6H | 110 | 18 | 9 | 7 |
| 042037332140000 | M14 | 2 | 6H | 110 | 20 | 11 | 9 |
| 042037332160000 | M16 | 2 | 6H | 110 | 20 | 12 | 9 |
| 042037332180000 | M18 | 2,5 | 6H | 125 | 25 | 14 | 11 |
| 042037332200000 | M20 | 2,5 | 6H | 140 | 25 | 16 | 12 |
| 042037332220000 | M22 | 2,5 | 6H | 140 | 25 | 18 | 14.5 |
| 042037332240000 | M24 | 3 | 6H | 160 | 30 | 18 | 14.5 |
| 042037332270000 | M27 | 3 | 6H | 160 | 30 | 20 | 16 |
| 042037332300000 | M30 | 3,5 | 6H | 180 | 35 | 22 | 18 |
| 042037332330000 | M33 | 3,5 | 6H | 180 | 35 | 25 | 20 |
| 042037332360000 | M36 | 4 | 6H | 200 | 40 | 28 | 22 |
Use
| MACHINED MATERIAL | HOLE TYPE | CUTTING SPEED | LUBRICATION | USE |
|---|---|---|---|---|
| Aluminium alloys si content < 10% | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content < 10% | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content < 10% | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content < 10% | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content > 10% | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Aluminium alloys si content > 10% | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Aluminium alloys si content > 10% | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Aluminium alloys si content > 10% | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length L < 2,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length L < 2xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Through hole (thread length L < 1,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (long chipping) | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (long chipping) | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (long chipping) | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (long chipping) | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (short chipping) | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (short chipping) | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (short chipping) | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (short chipping) | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Free cutting steels up to 800 N/mm2 | Through hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length L < 2,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length L < 2xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Heat-treated steels up to 1100 N/mm2 | Through hole (thread length L < 1,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Plain cast steels up to 800 N/mm2 | Through hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Through hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length L < 2,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length L < 2xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Tool steels up to 1100 N/mm2 | Through hole (thread length L < 1,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Unalloyed aluminium | Through hole (thread length L < 1,5xd1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed aluminium | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed aluminium | Blind hole (thread length L < 2,5xd1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed aluminium | Blind hole (thread length L < 2xd1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Through hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |