Typ VA Series 22 2290NX
Machine taps typ VA for steel up to 1000N/mm2 [For blind holes]
High performance machine tap with spiral flutes, metric, DIN 371, vapourised, suitable for case hardened and nitriding steels, stainless steels with strength up to 1000 N/mm2, spheroidal and malleable cast iron, aluminium alloys, copper and zinc alloys.
Product variants
| ID | D1 | P | Tolerance | L1 | L2 | D2 | a |
|---|---|---|---|---|---|---|---|
| 042037132020000 | M2 | 0,4 | 6H | 45 | 8 | 2.8 | 2.1 |
| 042037132025000 | M2,5 | 0,45 | 6H | 50 | 9 | 2.8 | 2.1 |
| 042037132030000 | M3 | 0,5 | 6H | 56 | 5 | 3.5 | 2.7 |
| 042037132035000 | M3,5 | 0,6 | 6H | 56 | 6 | 4 | 3 |
| 042037132040000 | M4 | 0,7 | 6H | 63 | 7 | 4.5 | 3.4 |
| 042037132050000 | M5 | 0,8 | 6H | 70 | 8 | 6 | 4.9 |
| 042037132060000 | M6 | 1 | 6H | 80 | 10 | 6 | 4.9 |
| 042037132080000 | M8 | 1,25 | 6H | 90 | 13 | 8 | 6.2 |
| 042037132100000 | M10 | 1,5 | 6H | 100 | 15 | 10 | 8 |
Use
| MACHINED MATERIAL | HOLE TYPE | CUTTING SPEED | LUBRICATION | USE |
|---|---|---|---|---|
| Aluminium alloys si content < 10% | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content < 10% | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content < 10% | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content < 10% | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Aluminium alloys si content > 10% | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Aluminium alloys si content > 10% | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Aluminium alloys si content > 10% | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Aluminium alloys si content > 10% | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length L < 1,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length L < 2xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Case hardened steels and nitriding steels up to 1100 N/mm2 | Blind hole (thread length L < 2,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (long chipping) | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (long chipping) | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (long chipping) | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (long chipping) | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Copper alloys (short chipping) | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (short chipping) | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (short chipping) | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Copper alloys (short chipping) | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Free cutting steels up to 800 N/mm2 | Blind hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length L < 2xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length L < 2,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Heat-treated steels up to 1100 N/mm2 | Blind hole (thread length L < 1,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Plain cast steels up to 800 N/mm2 | Blind hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Spheroidal graphite cast iron and malleable cast iron | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 450 - 800 N/mm2 | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Stainless steels and heat resisting steels with strength 600 - 1000 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Recommended use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length L < 1,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length L < 2xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Structural steels and heat-treated steels up to 800 N/mm2 | Blind hole (thread length L < 2,5xd1) | 10-15 | Cutting Oil/Emulsion | Possible use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length L < 1,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length L < 2xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Tool steels up to 1100 N/mm2 | Blind hole (thread length L < 2,5xd1) | 8-10 | Cutting Oil/Emulsion | Recommended use |
| Unalloyed aluminium | Blind hole (thread length L < 1,5xd1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed aluminium | Blind hole (thread length L < 2xd1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed aluminium | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed aluminium | Blind hole (thread length L < 2,5xd1) | 15-20 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Unalloyed copper | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length L < 1,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length L < 2xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length < 1,5 d1, pilot drilling depth ≥ L+d1) | 10-12 | Cutting Oil/Emulsion | Possible use |
| Zinc and zinc alloys | Blind hole (thread length L < 2,5xd1) | 10-12 | Cutting Oil/Emulsion | Possible use |